裕可有限公司
C 直筒夾系列
銑刀柄插入筒夾內之長度需達「L1」長度以上，以發揮最佳效果。
Share:
產品規格
| Model No. | d | D | l | L | |
|---|---|---|---|---|---|
| C20 | 3.0 | 3.0 | 20.0 | 28.0 | 54.0 |
| 4.0 | 4.0 | 20.0 | 28.0 | 54.0 | |
| 5.0 | 5.0 | 20.0 | 28.0 | 54.0 | |
| 6.0 | 6.0 | 20.0 | 36.0 | 54.0 | |
| 7.0 | 7.0 | 20.0 | 38.0 | 54.0 | |
| 8.0 | 8.0 | 20.0 | 38.0 | 54.0 | |
| 9.0 | 9.0 | 20.0 | 38.0 | 54.0 | |
| 10.0 | 10.0 | 20.0 | 40.0 | 54.0 | |
| 11.0 | 11.0 | 20.0 | 40.0 | 54.0 | |
| 12.0 | 12.0 | 20.0 | 45.0 | 54.0 | |
| 13.0 | 13.0 | 20.0 | 45.0 | 54.0 | |
| 14.0 | 14.0 | 20.0 | 45.0 | 54.0 | |
| 15.0 | 15.0 | 20.0 | 46.0 | 54.0 | |
| 16.0 | 16.0 | 20.0 | 48.0 | 54.0 | |
| C32 | 5.0 | 5.0 | 32.0 | 28.0 | 64.0 |
| 6.0 | 6.0 | 32.0 | 36.0 | 64.0 | |
| 7.0 | 7.0 | 32.0 | 37.0 | 64.0 | |
| 8.0 | 8.0 | 32.0 | 37.0 | 64.0 | |
| 9.0 | 9.0 | 32.0 | 37.0 | 64.0 | |
| 10.0 | 10.0 | 32.0 | 40.0 | 64.0 | |
| 11.0 | 11.0 | 32.0 | 40.0 | 64.0 | |
| 12.0 | 12.0 | 32.0 | 45.0 | 64.0 | |
| 13.0 | 13.0 | 32.0 | 45.0 | 64.0 | |
| 14.0 | 14.0 | 32.0 | 46.0 | 64.0 | |
| 16.0 | 16.0 | 32.0 | 48.0 | 64.0 | |
| 18.0 | 18.0 | 32.0 | 49.0 | 64.0 | |
| 19.0 | 19.0 | 32.0 | 49.0 | 64.0 | |
| 20.0 | 20.0 | 32.0 | 50.0 | 64.0 | |
| 25.0 | 25.0 | 32.0 | 56.0 | 64.0 | |
聯繫我們
若您有任何的建議或指教，請留下寶貴資訊，我們會儘快回覆您。